What is this and how can this be corrected? Workgroup printer – laser – monochrome. Laptops by Dan Ackerman Nov 26, Make sure that they are not laying flat. Looking for a tech bargain real soon?

Uploader: Mucage
Date Added: 14 May 2005
File Size: 16.77 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 67725
Price: Free* [*Free Regsitration Required]

The HP Tango X writes the book on bookshelf printers.

Xanté Accel-a-Writer 3N – printer – monochrome – laser Series

Discussion threads can be closed at any time at our discretion. And can we talk mail-order mattresses? Make sure that you get it seated properly. Tablets by Dan Ackerman 8 days ago. SCANNER is displayed when the laser unit is not level, a bad connection is detected by the sensor or accel-aw-riter scanner motor has stopped accel-a-wrkter.

Engine tolerances for this printer are plus or minus 2 mm. Also, make sure that the media is aligned properly when loaded in the tray.

Make sure that they are not laying flat. Check to see if the skew occurs from all trays or only one tray. Envelopes, transparencies, labels, plain paper.


We delete comments that violate our policywhich we encourage you to read. Printer Media Media Load 3m. To correct this, pull the toner cartridge from the printer and check the metal contacts on the left side of the printer. On the right side, following the guide for the toner you will notice another contact, which is the ground. A cheap and charming color laser printer A cheap and charming color laser printer by Dan Ackerman. MEDIA for the media type on which you are printing.

Xante Accel-a-Writer 3N

If not corrected — contact Technical Support. Finally, a multifunction accel-a-wrirer printer with low-cost ink refills Finally, a multifunction inkjet printer with low-cost ink refills by Justin Yu.

On occasion, the sides of 3 toner cartridge not making good contact can also cause the problem. This technology corrects for inconsistent line lengths and skew and should allow you to get your line lengths under control. Check both ends to ensure each springs back. What is this and how can this be corrected?

The paper guides in the tray are probably out of place. The physical memory is displayed on your Startup Page.


Printer Output Max Speed. Make sure that it is not pushed in to where it does not make contact with the toner. If the problem is still occurring, the EP setting may need adjustment. Printers by Rick Broida Oct 16, The toner cartridge also may be getting close to end of life; if so, replacing the toner cartridge should help to resolve the issue.

I am getting tear drops on my output. If it only occurs from a single tray, then observe the pickup rollers and see if they are causing the media to be fed through the printer at an angle. Turn off the printer for 30 minutes to allow fuser to cool and restart. Environmental Parameters Sound Emission. Best Cyber Monday deals acceel-a-writer Staples: